Content | Webforge Locker C253 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an untreated or hot dip galvanised finish with a plain or serrated surface. | Webforge Locker C325 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in mild steel, untreated or hot dip galvanised with a plain or serrated surface. | Webforge Locker fine woven wire mesh with 0.56mm stainless steel (304) wire and 1mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Stainless Steel top clip, to suit pattern G (38 x 38mm FRP opening) can be used with C301SM (bolt and nut) | Webforge Locker B325 is a walkway grating with spacings of 30 x 50mm c/c on loadbars and crossrods. Available with a Plain or serrated surface and in an untreated or hot dip galvanised finish. | Webforge Locker D325 is a walkway grating with spacings of 40 x 50mm c/c on loadbars and crossrods. Available in an untreated mild steel or a hot dip galvanised finish, with a plain surface. | Yellow abrasive safety nosing with a galvanised or aluminium backing available in a range of lengths to suit the specifications of your job. | Fibre Reinforced plastic sheets with 38 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. |
Material Finish | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | | Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | | Grit |