Content | Webforge Locker fine woven wire mesh with 0.7mm stainless steel (304) wire and 1.8mm openings. Material is 1525mm wide and cut to the meterage ordered, price is per metre.Max possible single length 30m, | Webforge Locker C253 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an untreated or hot dip galvanised finish with a plain or serrated surface. | Webforge Locker C325 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in mild steel, untreated or hot dip galvanised with a plain or serrated surface. | Webforge Locker fine woven wire mesh with 0.56mm stainless steel (304) wire and 1mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Stainless Steel top clip, to suit pattern G (38 x 38mm FRP opening) can be used with C301SM (bolt and nut) | Webforge Locker B325 is a walkway grating with spacings of 30 x 50mm c/c on loadbars and crossrods. Available with a Plain or serrated surface and in an untreated or hot dip galvanised finish. | Webforge Locker D325 is a walkway grating with spacings of 40 x 50mm c/c on loadbars and crossrods. Available in an untreated mild steel or a hot dip galvanised finish, with a plain surface. | Yellow abrasive safety nosing with a galvanised or aluminium backing available in a range of lengths to suit the specifications of your job. | Fibre Reinforced plastic sheets with 38 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. |
Material Finish | | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | | Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | | Grit |