Content | Webforge Locker fine woven wire mesh with 0.32mm stainless steel (304) wire and 0.71mm openings. Material is 1525mm wide and cut to the meterage ordered, pricing is per metre. Max possible single length 30m, | Webforge Locker B255 is a walkway grating with spacings of 30 x 50mm c/c on loadbars and crossrods. Plain surface and in untreated or a hot dip galvanised finish. | Webforge Locker A405 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. Available in a range of materials, and material and surface finishes. | Webforge Locker F325 is a walkway grating with centres of 60 x 50mm on loadbars and crossrods respectively. Available in untreated or hot dip galvanised mild steel with a plain or serrated surface. | Mild Steel grating clipset suitable for use on grating patterns A through to F,(Set consists of Galvanised Top, Bottom, and 65x8mm bolt with nyloc nut) | Webforge A253 is a walkway grating, with spacings of 30 x 100mm c/c on loadbars and crossrods. Available with a plain surface in Aluminium and a plain or serrated surface in Mild steel (untreated) or with a hot dip galvanised finish. | Webforge A325 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. Available in aluminium or mild steel untreated or hot dip galvanised with a plain or serrated surface and a range of panel widths. | Mild Steel grating bottom clip suitable for use on grating patterns A through to F, can be used with C304MG, C100MG. |
Material Finish | | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised |